SAP C_TSCM42_67 Exam Dumps

SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7

953 Reviews

Exam Code	C_TSCM42_67
Exam Name	SAP Certified Application Associate - Production Planning & Manufacturing with SAP ERP 6.0 EHP7
Questions	106 Questions Answers With Explanation
Update Date	04, 14, 2026
Price	Was : $81 Today : $45 Was : $99 Today : $55 Was : $117 Today : $65

Add To Cart

Demo Questions

Question # 1

Which property applies for consumption with planning strategy 40 (planning with final assembly)?

A. Consumption creates a static and binding assignment between the planned independent requirements and the customer requirements for the entire procurement process.
B. Consumption takes place with the planning material.
C. Consumption can reduce the total originally planned production quantity.
D. Consumption can increase the total originally planned production quantity.

Show Answer

Question # 2

The availability check during production order creation should use a different scope of check than during order release.How can you fulfill this requirement?

A. Maintain appropriate checking rules in checking control for order creation and order release.
B. Maintain appropriate availability checking rules in the order type-dependent parameters.
C. Maintain an appropriate availability checking group in the material master.
D. Maintain appropriate availability checking rules in the production scheduling profile.

Show Answer

Question # 3

Which of the following requirements for a manufacturing plant can be supported by using process manufacturing? (Choose three.)

A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.

Show Answer

Question # 4

The company you advise wants to control the availability check in so that when a production and/or process order is created, the following receipts or issues are taken into account: planned orders, purchase orders, production orders, reservations, dependent requirements. When the production and/or process order is released, only the stock that is currently freely usable should be taken into consideration. How can you fulfill this request?

A. Differentiated assignment of two different checking rules in check control.
B. Activate the freely usable stock in the scope of check.
C. Enter an appropriate availability checking group in the material master.
D. Enter an appropriate availability checking rule in the order type.

Show Answer

Question # 5

An enterprise based in the US produces an end product that is used with the unit of measure "pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that the material can be sold with the unit "kilogram" (KG).What is the easiest way to fulfill this requirement?

A. Define a unit of measure group that converts pounds to kilograms in the basic data customizing and assign it to the material master on basic data view 1.
B. Add a conversion factor for converting pounds to kilograms on basic data view 1 in the material master.
C. Create a new material with a reference to the original material and assign the metric unit of measure to the new material master.
D. There is no need to take any action. In this scenario, the conversion of units of measurements is done automatically.

Show Answer

Question # 6

What do you have to consider when you use SAP ECC long-term planning (LTP)? (Choose two)

A. A planning scenario must be released before it can be used in LTP.
B. Reorder point planned materials can be included in LTP.
C. LTP focuses on the operational planning of important components.
D. LTP creates purchase requisitions for external procurement.

Show Answer

Question # 7

Which of the following functions are available in SAP ECC when using capacity leveling? (Choose three)

A. Batch size optimization
B. Midpoint scheduling
C. Lot size optimization
D. Finite capacity scheduling
E. Setup time reduction

Show Answer

Question # 8

A user you advise wishes to transfer variable process instructions for automated processing directly to certain work centers and machines in the production department (for example, feed speed, pressing pressure, dry temperature). The user also wishes to receive variable as-is messages (such as actual quantities, actual times) from these work centers and machines and to process these messages for feedback concerning production orders. Which of the following options would you recommend to implement these requirements?

A. Execution Steps (XSteps) and process messages
B. SAP Business Intelligence (BI)
C. Plant data collection (PP-PDC) interface
D. SAP Application Link Enabling (ALE)

Show Answer

Question # 9

What do you have to consider regarding lot size procedures?

A. The procurement quantity of a lot size procedure can be specified using a safety time period profile.
B. If a long-term lot size is used, procurement is conducted with a long-term perspective.
C. The lot size quantity can be influenced using a minimum lot size and the rounding profile.
D. If a make-to-order production strategy is used, only the lot-for-lot (exact) lot size can be applied.

Show Answer

Question # 10

What do you have to consider regarding ATP checks in SAP ECC that are triggered from customer orders?

A. If the ATP check determines non-availability, it then checks in the next step whether timely procurement or production is possible.
B. The ATP quantity is the available quantity that can be used to confirm incoming customer orders.
C. An ATP check creates fixed links between customer orders and their confirmed receipts.
D. The ATP check does not take stocks and receipts into account. It checks consumption of planned independent requirements.

Show Answer

Question # 11

What sequence do you follow in master data maintenance to define the production of a material?

A. Create work centers -> Create routing -> Create BOM -> Carry out component assignment in work center
B. Create routing -> Create work centers -> Create BOM -> Carry out component assignment in BOM or routing
C. Create BOM -> Create work centers -> Create routing -> Carry out component assignment in work center
D. Create BOM -> Create work centers -> Create routing -> Carry out component assignment in BOM or routing

Show Answer

Question # 12

When maintaining a work center, formulas can be assigned in the scheduling view. Formulas use formula parameters for calculation.What can be the origin of the formula parameters used for scheduling? (Choose three)

A. User-defined fields in the operation of routings
B. General operation values of routings
C. General item values of bill of materials
D. General values from work scheduling view of the material master
E. Standard values in the operations of routings

Show Answer

Question # 13

What is a feature of the simu-lation mode for material requirements planning in SAP ECC?

A. It calculates the delay time which may occur in planning.
B. It triggers multilevel bottom-up scheduling.
C. It propagates exception messages from a component to the finished product.
D. It posts planning results to the database automatically

Show Answer

Question # 14

Which property applies for consumption with planning strategy 40 (planning with final assembly)?

A. Consumption can result in subsequent adjustments of planned receipts.
B. Consumption can reduce the originally planned production quantity.
C. Consumption takes place with the planning material.
D. Consumption creates a static and binding assignment between the planned independent requirements and the customer requirements for the entire procurement process.

Show Answer

Question # 15

Which repetitive manufacturing options can you use to carry out line loading in the SAP ECC system, and thus generate run schedule quantities (RSQ) from normal planned orders? (Choose three)

A. Automatic selection of the production line assigned to the MRP group used during material requirements planning (MRP)
B. Automatic selection of the production version in material requirements planning (MRP) using the selection methods setting
C. Automatic selection of the production version by applying quota arrangement records in material requirements planning (MRP)
D. A planning algorithm from capacity planning
E. Manual assignment of planned production quantities in a planning table

Show Answer

Question # 16

Which of the following statements about consumption are correct? (Choose two)

A. Consumption takes place on the material level between the planned independent requirements and the planned orders.
B. Consumption parameters (consumption mode and consumption interval) can be set in the material master or in the MRP group.
C. Consumption is restructured with the planning run.
D. Consumption can take place between order reservations and planned independent requirements, depending on the strategy.

Show Answer

Question # 17

Which statements are true for ECC Long-Term Planning (LTP)? (Choose two.)

A. Reorder point planned materials can be included in long-term planning.
B. In case of external procurement, long-term planning creates purchase requisitions.
C. A planning scenario must be released to use it in long-term planning.
D. Long-term planning generally is operational planning of important components.

Show Answer

Question # 18

Which of the following activities is necessary for the capacity availability check that can be carried out automatically when a production order is released?

A. Set the finite scheduling indicator and assign a checking rule in the work center for the operation to be checked.
B. Activate the availability check and assign an overall profile in the checking control of the order type / plant combination.
C. Assign an appropriate availability checking rule to the material master for the product.
D. Activate the availability check and assign an overall profile in the production scheduling profile.

Show Answer

Question # 19

Which of the following items of master data are needed for repetitive manufacturing? (Choose three)

A. Production supply area
B. Repetitive manufacturing profile
C. Production version
D. Master record for serial numbers
E. Product cost collector

Show Answer

Question # 20

Which of the following master data is necessary for the creation of material reservations for production orders?

A. Material master records
B. Production/resource tools
C. Routings
D. Production versions

Show Answer

Question # 21

What functions can you use for sub operations? (Choose two)

A. Costing
B. Material component allocation
C. Production/Resource tools allocation
D. Capacity planning

Show Answer

Question # 22

When modeling in-house production using SAP ECC, on which business levels can you create a bill of material (BOM)? (Choose two)

A. At the company code level
B. At the plant level
C. At the business area level
D. At the client level

Show Answer

Question # 23

You create a routing that includes five operations in an initial sequence (10, 20, 30, 40, 50). When capacity bottlenecks occur, you want to use a second sequence on other work centers for operations 30 and 40.Which sequence category do you use to create the second sequence in the system?

A. Finish-start relationship
B. Standard sequence
C. Parallel sequence
D. Alternative sequence

Show Answer

Question # 24

What could be a consequence of the confirmation of an operation?

A. Settlement of the actual costs
B. Reduction of capacity requirements
C. Rescheduling of the production order
D. Update of the planned costs

Show Answer

Question # 25

The stock/requirements list for a finished product contains only one sales order and one fixed planned order with the same quantity. The availability dates for both MRP elements are on working days. The availability date for the fixed planned order is set to a later date than the one for the sales order.However, a corresponding rescheduling exception message does not appear.What could be the reasons? (Choose two)

A. The delta between the availability dates falls within the tolerance window defined in Customizing.
B. The fixed planned order is outside the rescheduling horizon.
C. Requirements planning has not been carried out.
D. The MRP elements are linked via fixed pegging.

Show Answer