HP HPE6-A73 dumps

HP HPE6-A73 Exam Dumps

Aruba Certified Switching Professional Exam
507 Reviews

Exam Code HPE6-A73
Exam Name Aruba Certified Switching Professional Exam
Questions 127 Questions Answers With Explanation
Update Date August 24, 2026
Price Was : $81 Today : $45 Was : $99 Today : $55 Was : $117 Today : $65

What Is the HPE6-A73 Certification Exam?

The HPE6-A73 certification exam is a standardized assessment designed to measure a candidate's knowledge, competencies, and practical understanding within a defined professional field. It serves as the primary requirement for earning the Aruba Certified Switching Professional (ACSP) V1, a credential that represents a recognized level of proficiency in its respective industry. Depending on the field, this may involve theoretical knowledge, applied problem-solving, regulatory understanding, or hands-on procedural competence.

The exam is typically developed and maintained by an accrediting body or professional organization that sets the standards for the Aruba Certified Switching Professional (ACSP) V1. This ensures that anyone who earns the credential has met a consistent benchmark, regardless of where they studied or gained their experience. For many professionals, the HPE6-A73 Certification Exam represents a formal checkpoint in their career, one that confirms readiness to take on greater responsibility within their chosen field.

Why the Aruba Certified Switching Professional (ACSP) V1 Certification Matters?

Certifications like the Aruba Certified Switching Professional (ACSP) V1 exist because industries need a reliable way to verify competence beyond a resume or a job title. Earning this credential signals to employers, clients, and colleagues that a professional has invested time in building a structured foundation of knowledge and has been evaluated against an established standard.

Beyond individual recognition, the Aruba Certified Switching Professional (ACSP) V1 certification often supports broader professional development. It can influence hiring decisions, contribute to internal advancement, or serve as a prerequisite for more specialized roles within the field. In many industries, certifications also help standardize expectations across organizations, making it easier for professionals to move between employers or sectors while carrying a credential that is widely understood and respected.

Who Should Take the HPE6-A73 Exam?

The HPE6-A73 exam is generally relevant to individuals who are either entering a field or looking to formalize skills they have already developed through experience. This can include early-career professionals seeking a credential to support their first steps into the industry, as well as experienced practitioners who want official recognition of knowledge gained on the job.

Students preparing to enter the workforce may also pursue the HPE6-A73 exam as a way to strengthen their qualifications before graduating or applying for their first roles. In some fields, employers actively encourage or require staff to pursue this certification as part of ongoing professional development, particularly in industries where standards, safety, or compliance play a significant role in daily responsibilities.

Knowledge and Skills Evaluated in the Aruba Certified Switching Professional Exam

The Aruba Certified Switching Professional Exam is built to evaluate both foundational knowledge and the practical judgment needed to apply that knowledge in real situations. Candidates are generally expected to understand core principles and terminology relevant to their field, along with the reasoning behind established procedures, standards, or best practices.

Depending on the industry, this may include understanding regulatory requirements, following established protocols, applying analytical or technical methods, or exercising sound judgment in situations that require careful decision-making. Rather than testing isolated facts in a vacuum, the Aruba Certified Switching Professional Exam tends to reward candidates who can connect concepts to realistic scenarios, reflecting the kind of thinking expected in day-to-day professional practice.

HPE6-A73 Exam Preparation Resources

Preparing for the HPE6-A73 certification exam becomes more effective when using high-quality and up-to-date study materials. MyCertsHub provides resources designed to help candidates build knowledge, practice consistently, and become familiar with the actual exam format.

Preparation Features:

  •   127 carefully prepared practice questions
  •   Updated on August 24, 2026
  •   HPE6-A73 Practice Questions & Answers
  •   Comprehensive Study Guide covering the latest exam objectives
  •   Interactive Practice Test Engine for realistic exam simulation
  •   Printable PDF study material for convenient offline preparation
  •   Free Updates For 3 Months
  •   Money-Back Guarantee according to our Refund Policy

How to Prepare for the HPE6-A73 Certification Exam?

Effective preparation for the HPE6-A73 certification exam usually begins with a clear understanding of the exam's objectives and structure. Reviewing official guidelines or documentation published by the certifying body provides the most accurate picture of what will be covered and how heavily different areas are weighted.

From there, many candidates benefit from building a structured study plan that breaks preparation into manageable sections over a set period of time. A well-organized HPE6-A73 Study Guide can help sequence this material logically, especially for those approaching a topic for the first time. Consistent review, paired with realistic practice, tends to produce better retention than concentrated last-minute studying.

Practical experience, where applicable to the field, also plays an important role in preparation. Working through HPE6-A73 Practice Questions and a HPE6-A73 practice test can help candidates identify gaps in their understanding and become familiar with the format and pacing of the actual exam. In fields where hands-on skill is assessed, supplementing study with real-world practice or supervised experience often makes the difference between recognizing correct information and genuinely understanding it.

Benefits of Earning the Aruba Certified Switching Professional (ACSP) V1 Certification

Successfully earning the Aruba Certified Switching Professional (ACSP) V1 certification offers benefits that extend well beyond passing a single exam. It provides documented proof of competence that can be referenced on a resume, professional profile, or internal performance review, offering a clear, third-party validation of skill and knowledge.

The credential can also strengthen professional credibility when working with clients, patients, stakeholders, or colleagues who may not be positioned to evaluate technical or specialized knowledge directly. Over time, this recognition often contributes to expanded career opportunities, whether through new responsibilities, higher-level roles, or eligibility for additional certifications that build on this foundational credential.

Prepare for the HPE6-A73 Exam with MyCertsHub

Preparing for the HPE6-A73 exam is a process that benefits from organized, consistent effort rather than rushed, last-minute review. MyCertsHub is designed to support that process by offering study resources, practice materials, and educational content that help candidates understand what the Aruba Certified Switching Professional Exam covers and how to approach their preparation thoughtfully.

Whether someone is just beginning to explore the Aruba Certified Switching Professional (ACSP) V1 or is in the final stages of reviewing material before their exam date, MyCertsHub aims to serve as a dependable resource throughout that journey. Every candidate's path to certification looks a little different, and the goal remains the same: to provide clear, genuinely useful information that supports real understanding of the subject matter.

HP HPE6-A73 Sample Question Answers

Question # 1

Which protocol should be configured to allow NetEdit to discover third-party devices? 

A. SNMP 
B. SSH 
C. HTTPS 
D. HTTP 



Question # 2

An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities. The campus involves a core, as well as multiple access layers. Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs? 

A. VRF 
B. VRRP
 C. IP helper 
D. Active gateway 



Question # 3

An administrator creates an ACL rule with both the “count” and “log” option enabled. What is correct about the action taken by an AOS-CX switch when there is a match on this rule? 

A. By default, a summarized log is created every minute with a count of the number of matches 
B. Logging will not include certificate and TLS events, but counting will 
C. The “count” and “log” options are processed by the AOS-CX switch’s hardware ASIC 
D. The total in the “log” record and the count could contain different rule matching statistics 



Question # 4

What is correct regarding rate limiting and egress queue shaping on AOS-CX switches? 

A. Only a traffic rate and burst size can be defined for a queue 
B. Limits can be defined only for broadcast and multicast traffic 
C. Rate limiting and egress queue shaping can be used to restrict inbound traffic
 D. Rate limiting and egress queue shaping can be applied globally



Question # 5

Which statement is correct regarding ACLs and TCAM usage? 

A. Applying an ACL to a group of ports consumes the same resources as specific ACE entries 
B. Using object groups consumes the same resources as specific ACE entries 
C. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches 
D. Applying an ACL to a group of VLANs consumes the same resources as specific ACE entries 



Question # 6

What is correct regarding policy-based routing? 

A. Policies can only be applied to routed interfaces. 
B. Policies can be applied inbound and outbound. 
C. Monitoring of policy interfaces occurs every 60 seconds. 
D. Policy actions include routing permitting or dropping traffic.



Question # 7

An administrator is implementing a multi-area OSPF network. The network contains a backbone (area 0) and two other areas (1 and 2) connected to ABRs in the backbone The network has one routing switch connected to a service provider located in area 2 Which network design would minimize the number of routes in the routing switches' link state databases (LSDBs) while still allowing full connectivity? 

A. Area 0: Normal Area 1: Totally stubby Area 2: Totally stubby 
B. Area 0: Normal Area 1: Totally not-so-stubby Area 2: Totally stubby 
C. Area 0: Normal Area 1: Totally stubby Area 2: Totally not-so-stubby 
D. Area 0: Not-so-stubby Area 1: Totally not-so-stubby Area 2: Totally not-so-stubby 



Question # 8

A network has an ABR that connects area 0 and 1. A network engineer configures a summarized route for area 0. The ABR is a designated router (DR) for the segment it uses to connect to area 1. Which LSA type is assigned to this route when the summarized route is advertised into area 1 by the ABR? 

A. LSA1 
B. LSA4 
C. LSA3 
D. LSA2 



Question # 9

An administrator wants to track what configuration changes were made on a switch. What should the administrator implement to see the configuration changes on an AOS-CX switch? 

A. AAA authorization 
B. Network Analysis Engine (NAE) 
C. AAA authentication 
D. VSX synchronization logging 



Question # 10

What is the correct way of associating a VRF instance to either a VLAN or an interface? 

A. Switch(config)# interface Switch(config-if)# vlan access vrf attach 
B. Switch(config)# vlan vrf attach < vrf-name > 
C. Switch(config)# vlan Switch(config-vlan-# vrf attach < vrf-name > 
D. Switch(config)# vlan vrf < vrf-name > 



Question # 11

An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches. What would cause this problem? 

A. Local optimization was not enabled on the VSX LAG 
B. The VSX LAG hash does not match the remote peer 
C. The VSX LAG interfaces are in layer-3 mode 
D. LACP was enabled in active mode on the VSX LAG 



Question # 12

What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)? 

A. Uses IPSec to protect the management and data traffic 
B. Uses IPSec to protect the management traffic 
C. Supports only port-based tunneling 
D. Uses the same management protocol as Aruba APs 



Question # 13

A company is implementing AOS-CX switches at the access layer. The company wants to implement access control for employees and guests. Which security features will require a ClearPass server to be installed and used by the company?

A. Downloadable user roles 
B. Dynamic segmentation 
C. User-based tunneling (UBT) 
D. Change of authorization (CoA)



Question # 14

When cutting and pasting configurations into NetEdit, which character is used to enter commands within the context of the previous command? 

A. <ESC>
B. ">" 
C. Space 
D. Tab 



Question # 15

What is a best practice concerning voice traffic and dynamic segmentation on AOS-CX switches? 

A. Controller authentication and user-based tunneling of the voice traffic 
B. Switch authentication and user-based tunneling of the voice traffic 
C. Controller authentication and port-based tunneling of the voice traffic 
D. Switch authentication and local forwarding of the voice traffic 



Question # 16

How is voice traffic prioritized correctly on AOS-CX switches?

 A. By defining device profiles with QOS settings 
B. By placing it in the strict priority queue 
C. By implementing voice VLANs 
D. By implementing weighted fair queueing (WFQ) 



Question # 17

A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of “Unknown”. What is the cause of this issue? 

A. The administrator does not have the appropriate credentials to interact with NAE
 B. The number of scripts or agents has exceeded the hardware’s capabilities 
C. A connectivity issue exists between NAE and the AOS-CX switch 
D. The RESTful API has not been enabled on the AOS-CX switch 



Question # 18

A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of thirdparty VoIP phones are showing up in the NetEdit topology. The engineer deletes these, but they are automatically rediscovered by NetEdit and added back in. What should the administrator do to solve this problem?

A. Change the VoIP phone SNMP community string to something unknown by NetEdit 
B. Disable LLDP globally on the AOS-CX switches where phones are connected 
C. Disable SSH access on all the VoIP phones 
D. Disable the RESTful API on all the VoIP phones 



Question # 19

An administrator in a company of 349 users has a pair of AOS-CX switches with connections to external networks. Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes. What is the best way for the administrator to accomplish this?

 A. Create a route map with the correct route type and metrics 
B. Define the route type and metrics in the OSPF process 
C. Create a classifier policy with the correct route type and metrics 
D. Define a class and policy map with the correct route type and metrics 



Question # 20

Examine the following ACL rule policies: Permit traffic from 10.2.2.1 through 10.2.2.30 to anywhere Permit traffic from 10.2.2.40 through 10.2.2.55 to anywhere Deny all others Based on this policy, place the following ACL rule statements in the correct order to accomplish the above filtering policy.

A. deny ip 10.2.2.31 255.255.255.255 any permit ip 10.2.2.40 255.255.255.248 any permit ip 10.2.2.48 255.255.255.248 any deny ip 10.2.2.32 255.255.255.224 any permit ip 10.2.2.0 255.255.255.192 any 
B. permit ip 10.2.2.40 255.255.255.248 any permit ip 10.2.2.48 255.255.255.248 any permit ip 10.2.2.0 255.255.255.192 any deny ip 10.2.2.31 255.255.255.255 any deny ip 10.2.2.32 255.255.255.224 any 
C. deny ip 10.2.2.31 255.255.255.255 any deny ip 10.2.2.32 255.255.255.224 any permit ip 10.2.2.40 255.255.255.248 any permit ip 10.2.2.48 255.255.255.248 any permit ip 10.2.2.0 255.255.255.192 any 
D. deny ip 10.2.2.31 255.255.255.255 any permit ip 10.2.2.40 255.255.255.248 any deny ip 10.2.2.32 255.255.255.224 any permit ip 10.2.2.48 255.255.255.248 any permit ip 10.2.2.0 255.255.255.192 any 



Question # 21

A network administrator is implementing a configuration plan in NetEdit. The administrator used NetEdit to push the configuration plan to the switch. Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config? 

A. EDIT 
B. VALIDATE 
C. COMMIT 
D. DEPLOY 



Question # 22

A network administrator is implementing BGP for a larger network. The network has over 20 exit points across 15 different BGP routers. The administrator does not want to implement a fully-meshed iBGP peering between all BGP routers. Which feature should the administrator implement to reduce the number of peers the administrator needs to define? 

A. Next-hop-self 
B. BFD 
C. Peer-Groups 
D. Route reflectors 



Question # 23

A network administrator wants to replace older access layer switches with AOS-CX 6300 switches. Which virtual switching technology can the administrator implement with this solution? 

A. Both VSF and VSX 
B. Only Backplane stacking 
C. Only VSF 
D. Only VSX 



Question # 24

An administrator is implementing a multicast solution in a multi-VLAN network. Which statement is true about the configuration of the switches in the network? 

A. IGMP snooping must be enabled on all interfaces on a switch to intelligently forward traffic 
B. IGMP requires join and leave messages to graft and prune multicast streams between switches 
C. IGMP must be enabled on all routed interfaces where multicast traffic will traverse 
D. IGMP must be enabled on all interfaces where multicast sources and receivers are connected 



Question # 25

An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone’s LAN port is connected to the switch. Which statement is correct about this situation?

A. 802.1X must be configured to work in fallback mode 
B. Device fingerprinting is required for authentication 
C. The client-limit setting for port access needs to be changed er session. 
D. Device mode should be implemented 



Feedback That Matters: Reviews of Our HP HPE6-A73 Dumps

Leave Your Review