Cisco 300-610 Exam Dumps

An engineer is designing a Cisco 7000 Series disaster recovery site using the data center interconnect solution to provide gateway redundancy and needs to ensure that devices use gateways in their own data centers. Which design approach should be used to accomplish this goal?

An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series I/O Module. Thecompany's strict security policy requires that the port be in-band. The engineer must alsokeep theseconsiderations in mind:. The customer's security requirements mandate the use of a secure managementmechanism that supports authentication and encryption.. The port should support management over IP.Which port type must be used to meet these requirements?

An engineer must choose the World Wide Port Name for the Cisco UCS Fibre Channel virtual host bus adapter.Which identifier must be used?

Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI? 

An engineer must develop a Python tool to automate software upgrades of both data center and non-data center devices. All devices offer a RESTful API and require a JSON or XML payload Vendor-specific libraries must be avoided. Which library must the engineer choose?

A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:. All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.. Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.Which Fabric Interconnect SAN operational mode meets these requirements?

An engineer is expanding an existing ISCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used {prefix}. 2019-01.com.acme.123:00. ftd0cb21.bcb389458389Which addressing scheme was used in the environment?

An end user is experiencing network latency when accessing a database in a disaster recovery site. The monitoring team concluded that the database was writing simultaneously to the storage arrays on the primary and disaster recovery sites.Which design resolves this issue?  

Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?

A network engineer is using a Cisco UCS environment connected to a Fibre Channelstorage array. The Cisco UCS environment must be connected to an existing SAN network,and several Cisco MDS 9000 Series Switches must be added to increase storage density.The solution must not exhaust the SAN network from the list of available domain IDs afterconnecting Also, most of the SAN traffic must be mapped from the Cisco UCS blades to aspecific group of the fabric interconnect ports Which two features must be deployed tomeet these requirements? (Choosetwo.)

Which two methods mitigate congestion in a SAN network? (Choose two.) 

Which pools are used when a vNIC template is created in Cisco UCS Manager? 

Which authentication software natively runs within the CLI of Cisco NX-OS devices? 

An engineer requires a solution that achieves Ethernet traffic forwarding on all available paths from the hosts to the Cisco Nexus Fabric Extender and from the Fabric Extenders to the Cisco Nexus 5000 Series Switches. The NIC teaming from the Fabric Extender to a server should use an LACP EtherChannel. Which solution should be implemented to meet these requirements? 

A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate? 

What is an advantage of using OTV as compared to VPLS for data center redundancy?

A network architect designs a high-availability architecture for the Cisco UCS Fabric interconnects that installed in a data center. The architecture must support clustering and redundancy. Which architecture meets these requirements?

An engineer must design a Cisco HyperFlex solution to support a virtualized environment in a single data center location. The design must consider these customer requirements:. a large-scale cluster with eight or more nodes. distributed high-performance file system for virtualized servers. high fault tolerance to multiple node failuresWhich action meets these objectives?

A customer requires a tool to manage Cisco network hardware. The solution must use secure communication using a secure network protocol, support the use of declarative language to manage the state of resources, and periodically pull changes to the controlled nodes. Which tool meets these requirements?

Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?

When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?

A data center uses Cisco Nexus 7000 Series Switch and contains two tenants, tenant A and tenant B.. Tenant A uses IP addresses in the 10.2.30.41/24 to 10.2.30.64/24 range.. Tenant B uses IP addresses in the 10.2.30.120/24 to 10.2.30.192/24 range.The engineer must implement a solution that. Isolates the traffic for each tenant as separate routing data and control planes.. Physically partitions the Cisco Nexus device into separate multiple logical devices with separate management, failure domain isolation, and resource management.Which two technologies meet these requirements? (Choose two.)

A company must integrate an iSCSI storage solution into its existing production environment. The new iSCSI network must be accessible from a limited set of network segments. The client devices follow a strict network security policy to access critical data from the storage array. Which design steps must be used to meet these requirements?

A network consultant proposes that the configuration of the Cisco UCS servers be based on service templates to facilitate the UCS infrastructure operation. The service profiles must remain connected to the template and be modified when the template settings are changed.Which configuration meets these requirements?